Welcome to the Mira Advance ATL Manual, your guide to understanding and using the thermostatic electric shower. This manual provides essential information for installation, operation, and maintenance, ensuring a safe and enjoyable showering experience with precise temperature control.
1.1 Overview of the Mira Advance ATL Thermostatic Shower
The Mira Advance ATL Thermostatic Shower is a high-performance electric shower designed to deliver a safe and enjoyable showering experience. It features advanced thermostatic temperature control, which ensures consistent water temperature by compensating for changes in pressure, temperature, and voltage. This makes it ideal for maintaining a comfortable showering experience, even in fluctuating water conditions.
The shower is equipped with separate push-button controls, allowing users to easily select from three independent flow settings. This user-friendly design makes it simple to customize the shower experience to individual preferences. The Mira Advance ATL is also designed with safety in mind, preventing scalding by maintaining a stable temperature.
Additionally, the shower is fully performance-tested after assembly, ensuring reliability and quality. It is suitable for installation in a variety of settings and is designed for mains-fed cold water only. The product is accompanied by a comprehensive installation and user guide, providing clear instructions for setup and operation. With its advanced features and user-centric design, the Mira Advance ATL Thermostatic Shower is a reliable choice for modern bathrooms.
Key Features of the Mira Advance ATL
The Mira Advance ATL features thermostatic temperature control, compensating for pressure and voltage changes to maintain accurate water temperature. It includes three independent flow settings via push-button controls, ensuring a customizable shower experience. Designed for safety, it prevents scalding and is fully performance-tested for reliability.
2.1 Thermostatic Temperature Control for Consistent Water Temperature
The Mira Advance ATL incorporates advanced thermostatic temperature control, ensuring a consistent and safe water temperature during your shower. This feature automatically compensates for changes in water pressure, temperature, and voltage, delivering precise control. The system prevents sudden shifts in water temperature, eliminating the risk of scalding and providing a comfortable showering experience. With this technology, you can enjoy stable temperatures even in households with fluctuating water conditions. The thermostatic mechanism is designed to maintain your preferred temperature setting, allowing you to relax without worrying about unexpected changes. This makes the Mira Advance ATL ideal for families, including young children and the elderly, who may be more sensitive to temperature variations. The reliability of this feature is further enhanced by rigorous testing, ensuring optimal performance in various plumbing setups. By maintaining consistent water temperature, the Mira Advance ATL enhances safety and comfort, making it a superior choice for modern bathrooms.
Installation Requirements and Setup
The Mira Advance ATL is designed for mains-fed cold water only. Ensure all electrical and water supplies are isolated before installation. Read all instructions carefully to guarantee a safe and proper setup, adhering to the provided guidelines for optimal performance.
3.1 Step-by-Step Guide for Installing the Mira Advance ATL
Installing the Mira Advance ATL Thermostatic Shower requires careful preparation and adherence to safety guidelines. Begin by isolating both the electrical and water supplies to ensure a safe working environment. Locate the shower unit in a convenient position, ensuring it is positioned over a water catchment area for easy drainage. Next, connect the cold water supply to the shower, following the manufacturer’s instructions for proper pipe fitting. Mount the shower unit securely to the wall, ensuring it is level and stable. Once the unit is in place, connect the electrical supply, making sure it aligns with the shower’s power requirements. After completing all connections, turn on the water and electricity supplies gradually to test for leaks and proper function. Finally, ensure the shower is properly vented and that all drainage systems are in place to prevent water accumulation. Consult a qualified professional if you encounter any issues during the installation process. Always refer to the official Mira Advance ATL manual for detailed instructions and safety precautions.
User Guide for Operation
The Mira Advance ATL offers intuitive controls for a seamless showering experience. Use the push-button interface to select from three independent flow settings and adjust the temperature effortlessly. The thermostatic system ensures consistent water temperature, preventing sudden changes for safety and comfort.
4.1 How to Use the Controls for Temperature and Flow Adjustment
Operating the Mira Advance ATL is straightforward, thanks to its intuitive control interface. To adjust the temperature, locate the thermostatic control knob, which allows for precise temperature selection. Turn the knob clockwise to increase the temperature and counterclockwise to decrease it. The system ensures consistent water temperature, compensating for pressure and voltage fluctuations.
For flow adjustment, use the push-button controls to select one of the three independent flow settings. These buttons are designed for ease of use, enabling you to customize your shower experience. Press the desired button to activate the preferred flow rate, which remains consistent until changed. The separate controls for temperature and flow provide enhanced user convenience, allowing for personalized settings. Always ensure the water is at a comfortable temperature before stepping in for optimal safety and comfort.
These features make the Mira Advance ATL user-friendly and adaptable to individual preferences, ensuring a safe and enjoyable showering experience.
Troubleshooting Common Issues
Identify common issues like inconsistent temperature or low flow. Check for blockages, ensure proper installation, and verify electrical connections. Refer to the manual for basic troubleshooting steps. If unresolved, contact a qualified professional for assistance.
5.1 Diagnosing and Resolving Common Problems
Diagnosing issues with the Mira Advance ATL Thermostatic Shower begins with identifying symptoms. Common problems include inconsistent water temperature, low flow rate, or complete shutdown. Start by checking the water supply and ensuring the shower is properly installed. If the temperature fluctuates, inspect the thermostatic cartridge for blockages or damage. For low flow, clean the showerhead and filters to remove any debris or limescale buildup. Electrical issues, such as no power, may require checking the circuit breaker or ensuring proper wiring connections.
- Inconsistent Temperature: Check for blockages in the inlet filters and ensure stable water pressure.
- Low Flow Rate: Descale the showerhead and clean the filters to improve water flow.
- Electrical Issues: Verify that the power supply is stable and all connections are secure.
If problems persist, consult the manual or contact a qualified technician. Regular maintenance can prevent many of these issues, ensuring optimal performance and longevity of the shower system.
Maintenance and Care Tips
Regular maintenance ensures optimal performance of the Mira Advance ATL. Descaling the showerhead and cleaning filters prevents limescale buildup. Check for leaks and tighten connections. Ensure electrical components are dry and free from corrosion. Annual professional inspections are recommended for longevity.
6.1 Regular Maintenance to Ensure Optimal Performance
Regular maintenance is crucial to ensure the Mira Advance ATL operates efficiently and safely. Begin by descaling the showerhead and cleaning the filters to prevent limescale buildup, which can reduce water flow and temperature accuracy. Check all connections for leaks and tighten them if necessary. Use a soft cloth to wipe down the exterior and controls, avoiding harsh chemicals that could damage the finish. Additionally, inspect the electrical components for signs of corrosion or wear and ensure they remain dry to prevent malfunction. For optimal performance, replace any worn-out seals or gaskets promptly. It is also recommended to schedule an annual inspection by a qualified professional to check internal components and ensure compliance with safety standards. By following these maintenance steps, you can extend the lifespan of your Mira Advance ATL and maintain its high-performance capabilities. Consistent upkeep ensures consistent, safe, and enjoyable showering experiences year-round.
Technical Specifications
The Mira Advance ATL features a 9.0 kW or 9.8 kW power rating, operating at 230V with an adjustable temperature limit for safe and consistent water temperature control. Designed for mains-fed cold water only, it ensures optimal performance and efficiency.
7.1 Power Ratings, Voltage, and Compatibility
The Mira Advance ATL Thermostatic Shower is available in two power ratings: 9.0 kW and 9.8 kW, ensuring efficient performance for varying water pressure conditions. It operates at a standard 230V voltage, making it compatible with most household electrical systems. Designed for mains-fed cold water only, the shower is not suitable for low-pressure or stored water systems. The unit is equipped with advanced thermostatic technology, maintaining consistent water temperature even with changes in water pressure or voltage. For safety, it features an adjustable temperature limit to prevent scalding and ensure a comfortable showering experience. The shower is designed to meet modern electrical and plumbing standards, ensuring compatibility with standard UK installations. Always ensure the electrical supply matches the specified voltage and power rating before installation. Refer to the technical specifications in this manual for detailed compatibility requirements and safety guidelines.
The Mira Advance ATL Thermostatic Shower offers a superior showering experience with precise temperature control and user-friendly design. By following this manual, users can ensure optimal performance, safety, and longevity of the product, making it a reliable choice for modern bathrooms.
8.1 Summary of the Mira Advance ATL Manual
The Mira Advance ATL Manual provides a comprehensive guide to understanding, installing, and maintaining the Mira Advance ATL Thermostatic Shower. This high-performance electric shower is designed to deliver consistent water temperature and safety through its advanced thermostatic control system. The manual outlines key features such as temperature stability, flow rate adjustment, and energy efficiency, ensuring a luxurious and reliable showering experience. It also includes step-by-step installation instructions, operation guidelines, and troubleshooting tips to address common issues. Regular maintenance recommendations are provided to prolong the product’s lifespan and ensure optimal performance. Whether you’re a homeowner or an installer, this manual offers clear, detailed information to make the most of the Mira Advance ATL. By following the instructions and guidelines outlined, users can enjoy a safe, comfortable, and efficient showering experience for years to come.